Product Details:
Brand | Yaskawa |
Model Name/Number | U 1000 |
Country of Origin | Made in India |
Frequency Control Range | 0.01 to 400 Hz |
Frequency accuracy (Temperature fluctuation) | Digital input: within +-0.01 % of the max. output frequency (-10 DegreeC to +40 DegreeC) |
Frequency setting resolution | Digital input: 0.01 Hz, Analog input: 1/2048 of the maximum output speed setting (11 bit plus sign) |
Output Speed Resolution | 0.001 Hz |
Braking torque | Same value as overload tolerance |
Motor protection | Electronic thermal overload relay |
Overload protection | Drive stops after 60 s at 150% of rated heavy duty output current |
Ground protection | Electronic circuit protection |
Ambient temperature | -10 DegreeC to +50 DegreeC (IP00 enclosure) -10 DegreeC to +40 DegreeC (IP20/UL Type 1 enclosure) |
Humidity | 95 RH% or less (non-condensing) |
Storage temperature | -20 DegreeC to +60 DegreeC (short-term temperature during transportation) |
Altitude | Max. 1,000 m (max. 3,000 m with outpunt current and voltage derating) |
Environmental conditions | Class 3CS (chemical gases), Class 3S2 (solid particles) |
CIMR-UA2A0028 | 7.5 | 28 | 5.5 | 22 |
CIMR-UA2A0042 | 11 | 42 | 7.5 | 28 |
CIMR-UA2A0054 | 15 | 54 | 11 | 42 |
CIMR-UA2A0068 | 18.5 | 68 | 15 | 54 |
Product Details:
Brand | Yaskawa |
Model Name/Number | L1000A |
Rated Output Voltage (dependent on input) | Three Ph 200V Class : 200 to 240VAC/Three Ph 400V Class : 380 to 480VAC |
Motor Types | Induction Motor, Permanent Magnet Motor (SPM/IPM) |
Speed Control Range | 1:40 (V/f Control) 1:1500 (Closed Loop Vector Control) |
Frequency Range | 0.01 to 200 Hz |
Output Frequency Resolution | 0.001 Hz |
Torque Limit | All vector control modes allow separate settings in four quadrants |
Accel/Decel time | 0.0 to 6000.0 seconds |
Ambient Temperature | -10 to 40DegC (open-chassis), -10 to 50Deg C (NEMA Type 1) |
Altitude | Up to 1000 meters |
Humidity | 95% RH or less (no condensation) |
Shock | 10 Hz to 20 Hz, 9.8 m/s2 max. 20 Hz to 55 Hz, 5.9 m/s2 max. |
Stall Prevention | Stall prevention during acceleration |
Allowable Voltage Fluctuation | -15% to 10% |
Allowable Frequency Fluctuation | +-5% |
Serial communication | MEMOBUS/Modbus (RTU mode) comm. RS-485, Max. 115.2 kbps |
L1000A is the new special purpose lift inverter drive designed for 3 Million starts at 165% output current It provides advanced control functions to run induction and PM motor applications in geared or gearless elevator systems
Features:
Product Details:
Model Name/Number | A1000 |
Brand | Yaskawa |
Control Method | V/F Control, V/F Control with PG Open Loop Vector Control |
Frequency Control Range | 0.01 Hz to 150 Hz |
Frequency Setting Resolution | Digital Reference Input: 0.01 Hz |
Output Frequency Resolution | 0.001 Hz |
Frequency Reference Setting Signal | -10 to +10 Volts, 0 to +10 Volts, 4 to 20 mAmps, pulse train |
Speed Control Accuracy | Open Loop Vector: +/- 0.2% (25 degrees C +/- 10 degrees C) Closed Loop Vector: +/- 0.02% (25 degrees |
Speed Response | Open Loop Vector: 10 Hz (25 degrees C +/- 10 degrees C) Closed Loop Vector: 50 Hz (25 degrees C +/- |
Torque Limit | Separate limit settings in four quadrants for OLC, CLV, Advanced CLV |
Accel / Decel Time | 0.00 to 6000.0 seconds (4 selectable combinations of independent accel and decel settings) |
Braking Torque | Based on external braking or regenerative system |
Motor Protection | Motor overheat protection based on output current |
The drive is of modular design with separate converter and inverter sections installed in a common enclosure. These sections can be paralleled to increase capacity to 2250 amps at 400 and 690 volts.
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information: